Technical Approvals
Our products meet the highest quality and safety standards - proven by national and international approvals. Here you will find all the relevant certificates for the safe and standard-compliant use of our tensioning and anchor technology.
SPANTEC - General Construction Supervisory Authority Approvals / General Design-Type Approvals (available in German only)
Z-34.13-235 Spantec Soil Nailing
PDF, 3.23 MB
Z-34.14-238 SPANTEC SV Piles 20 - 50 mm
PDF, 6.5 MB
Z-34.14-239 SPANTEC SV Piles Ø 57,5 und 63,5 mm
PDF, 3.74 MB
Z-34.11-231 SPANTEC-Permanent Bar Anchor St 950/1050 ∅ 26,5 - 40,0 mm
PDF, 5.77 MB
Z 34.11-249 SPANTEC Permanent Bar Anchorr B500B ∅ 40 mm und 50 mm und S 555/700 ∅ 63,5 mm
PDF, 17.63 MB
Z-34.11-236 SPANTEC Strand Anchor with Steel Tendon 2-22 Strands
PDF, 6.46 MB
BAUER Strand Anchor with Steel Tendon 2-12 Strands
PDF, 9.02 MB
Z-13.1-145 SPANTEC-Strand Post Tensioning System
PDF, 3.22 MB
Z-13.8-154 Anchor heads for injection anchor with 2-12 Strands
PDF, 12.04 MB
BAUER - General Construction Supervisory Authority Approvals / General Design-Type Approvals (available in German only)
Z-20.1-101 Soil Nailing
PDF, 932.69 KB
Z-34.11-201 Strand Corrugated Tube Anchor 2-12 Strands
PDF, 3.24 MB
Z-13.8-136 Anchor Heads
PDF, 431.46 KB
Z-34.25-200 Ductile Pile
PDF, 4.64 MB
Steel bars and accessories manufacturer - General Construction Supervisory Authority Approvals / General Design-Type Approvals (available in German only)
Z-1.1-58 Reinforcing bars B500B with thread ribs – SAS 500, nominal diameter: 12 to 50 mm (available in German only)
PDF, 1.46 MB
Z-1.5-174 Threaded couplers and end anchorage for reinforcing steel bars B500B with thread ribs (SAS 500), nominal diameter: 12 to 50 mm
PDF, 10.26 MB
Z-1.1-1 Steel bars with thread ribs SAS 555/700, nominal diameter: 57,5 and 63,5 mm
PDF, 351.09 KB
Z-1.5-175 Threaded couplers and end anchorage for steel bars with thread ribs (SAS 555/700), nominal diameter: 57,5 mm and 63,5 mm)
PDF, 3.71 MB
Z-1.1-167 Reinforcing bars with thread ribs B500B, nominal diameter: 16, 20, 25, 28 and 32 mm (available in German only)
PDF, 1.74 MB
Z-1.1-59 Reinforcing bars with thread ribs AMTB500 B500B, nominal diameter: 40 mm and 50 mm
PDF, 1.73 MB
Z-1.1-198.1 Steel bars with thread ribs S 555/700, nominal diameter: 57,5 und 63,5 mm
PDF, 544.51 KB